Watch how Quickly Urbo-Dryer heats the air flow - 60° - 120° in 3.5 minutes.
Watch how Quickly Urbo-Dryer heats the air flow - 75° - 133° in 3.5 minutes.
Efficiently Removes:· Solvents, water, and chips with high volume-low
pressure heated and filtered air
The-high speed pump impeller blades heat the air through rotational friction (60°+ temperature
rise over ambient air) no heater elements to replace or maintain.
Cost- Effectively Replaces:
Compressed air that is often contaminated with oil and water.
Compressed air is also cold and is expensive to produce,
Bottled Air: Urbo-Dyer air is filtered ambient air. Electronics and Medical Device companies save using Urbo-Dryer in place of expensive bottled gases.
URBO-DRYER draws only 6-8 amps. of current at 110 volts.
URBO-DRYER is particularly effective on blind holes because it evaporates fluids on contact
* Frees-up your compressed air for other operations.
* Delivers a constant supply of heated (120+° F), high volume (97 cfm), low pressure (5 psi) air.
* Eliminates-the risk of injury associated with the use of high pressure air.
* Drying parts using theURBO-DRYER is at least 3-5 times faster-saving labor.
* Minimal system maintenance-a filter every two-three years ($68), no other maintenance required.
* Small parts are blown off without being blown away due to the low pressure.
* URBO-DRYER draws its air in through a washable bi-fold filter offering 19 square feet of filter media
filtering down to 3 micron.
Urbo-Dryer customers tell us that they Urbo-Dryer can pay for itself in just electricity cost savings over compressed air in just a few months!
We have a customer using the URBO-DRYER to agitate their anodizing tank
URBO-DRYER comes complete with a 10' flexible light weight air hose ready to use right out of the carton, with efficiency and worker safety unparalleled in the shop. INEXPENSIVE: ONLY $1035.00 Warranty- one year parts & labor Shipping weight 27 Ibs.
MACHINE SHOPS - For drying off machined parts after washing and cleaning.
MEDICAL PARTS - For drying after cleaning medical parts that cannot be contaminated.
PLATING INDUSTRY - Blowing off parts prior to going into heat cabinet to avoid water spotting.
MANUFACTURING - A clean air source for drying or positioning of parts in assembly.
ELECTRONICS - For rapid drying of circuit boards and electronics after washing off flux.
WOODWORKING - For clean air to blow off parts to avoid contamination from water & oil.
AUTOMOTIVE - For drying off washed steel engine & transmission parts that rust easily.
AUTO DETAILERS - For drying shampooed carpeting and upholstery.
PLASTIC WELDING - The perfect air source for all your plastic welding requirements.
ANY USER REQUIRING - A large volume of clean, oil & water free, and heated air in their manufacturing.
|Urbo-Dryer 60||5 psi, 104 cfm
60° rise over ambient
|Shipping Weight 32 lbs
Cabinet 12"L x 10"H x 8"W
|Urbo-Dryer 90||7 psi 94 c.f.m.
65º rise over ambient
|Shipping Weight 44 lbs,
Cabinet 16"L x 11.25"W x 12" H
UD-90 - Large 3 Stage Model 7 psi 94 c.f.m. More air, warmer air than standard Urbo-Dryer - $1745
Urbo-Dryer 90 raises the air temperature 65+º, and produces more air, at a higher pressure than the standard Urbo-Dryer.
|Watch Urbo-Dryer 90 raise the temperature from 66º -121º in 3.5 minutes.||Watch Urbo-Dryer 90 raise the temperature from 79º-129º in 3.7 minutes|
Shipping Weight 44 lbs, Cabinet 16"L x 11.25"W x 12" H
Small Parts Nozzle Available
|Small Parts Nozzle|
|Small Parts Nozzle Installed|
|Small Parts Nozzle on Right, Standard Left|
"This is the first product I've ever bought that my employees asked me to buy more of because it worked so good." C.G., Pawtucket RI
( C.G. bought 1, ordered 2 more the day he got it and order 4 more after a couple of months )
home | highlights | How URBO-DRYER Works