The AUTO-1001 HVLP Automatic Spray Gun by LEX-AIRE provides the fine
finish you need with the benefits of HVLP Spraying.
The Auto-1001 is a no compromise solution to your automatic spray finishing
needs.
The Auto-1001 will provide the same speed and finish quality as your conventional
high pressure compressed air guns. Unlike other HVLP Spray guns, the AUTO-1001
truly works!
The Auto-1001 is a bleeder type spray gun. It can use an existing triggered air supply or the LEX-AIRE Aire-Pak.
The Aire-Pak is hooked up to a compressed air line and your trigger/signal line. The Aire-Pak starts and stops the air flow as well as relaying the trigger/signal to the gun. An added benefit of the Air-Pak is the ability to delay the shut-off of the air flow from 0 - 60 seconds.
The Aire-Pak allows the user to mount the Auto-1001 on a robot arm or any location remote from the Aire-Pak
The Aire-Pak eliminates the expense and necessity of coordinating trigger/signal lines for atomizing air and needle pullback.
Sample Auto-1001 & Aire-Pak Connections
See the dimensions and weight of the Auto-1001
See our Parts Breakdown & Prices for
our reasonable parts prices
A mounting bracket kit is available for the Auto-1001 for $15.95 The mounting bracket attaches to the 1001 and has a 1/2" diameter hole with a set-screw for attaching to a mounting rod.
LEX-AIRE Automatic Guns on site.
The AUTO-1001 is available to be shipped to you now!
We ship via UPS (United Parcel Service) worldwide.
We can also ship by parcel post, other carrier, or if you are in a hurry
we can put it on a commercial airline flight for you to pick up at your
local airport.
We accept payment by check, credit card, or wire
You can call us at 800-LEX-AIRE ( 800-539-2473) in the United States
You can call us at 781-646-1102 from anywhere in the world
You can fax us at 781-646-2827 from anywhere in the world